The purpose is to lift the fork directly with a mechanical lever when there is no load or load is small, instead of using a hydraulic lifting device. In this way, the lifting speed can be accelerated and operational efficiency can be skipped. However, when using the fast lifting device, it should be noted that the neutral valve of the hydraulic system must be opened to make the oil cylinder, oil pump and mailbox all connected to prevent the suction of the piston when rising. Because of the double acting piston pump, the fork can rise up and down when handling the handle.
When the goods rise to a certain height, it is used to push and pull the operation of the forklift truck by hand. After reaching the destination, the goods can continue to rise or fall for stacking. When unloading, the handle of the oil return valve will be relaxed, and the goods will fall by themselves. The speed of descent can be controlled by the operator to control the size of the oil return valve. There is a safety valve in the oil circuit to prevent overload. In the no-load state and the low fork, the distance between the bottom of the fork and the ground and the height of the insertion point from the ground, in the no-load state and the fork in the elevated position, the height of the upper surface of the pallet truck fork from the ground.
The short distance allowed between the fork root of a hauler and the near point on the rear wheel near the fork root. User forklift when the choose and buy, should not only pay attention to the large amount of load whether meet the requirements, and pay attention to the load center distance often carry goods whether meet the requirements, if not meet, should choose load a larger amount of forklift, you requested until the load curve of load center distance of the load quantity meet your requirements. Electric stacker is simple in structure, easy to operate, small turning radius, suitable for narrow space operation, can complete goods stacking/picking, loading/unloading, picking operations.
The lifting height of the electric stacker is generally not more than 4.5m, and it can generally complete the loading, unloading and picking operation of 3-4 layers of goods on the shelves of ordinary warehouses. Due to its poor flexibility compared with the electric pallet truck, it is not suitable for long-distance horizontal handling operations in warehouse operations. In summary, manual hydraulic truck initial purchase cost is lower, service cost is lower, and does not need to charge, but it needs to consume more physical energy, and the work efficiency is lower.
Electric trucks are a little bit more expensive, but at the same time you get efficiency, you get twice the efficiency and you reduce the risk that the driver might face, which is definitely worth it in the long run. Only by constantly carrying out technological innovation and exploration, timely introducing new products to the market, accepting the test of the market, and constantly improving, can enterprises develop and grow and remain invincible in the fierce market competition.
Post time: Mar-14-2022