Manual stacker and electric stacker both belong to stacker, but there are great differences in comparison. In each function and effect, electric stacker is much better than manual stacker. Of course, manual stacker can go through the elimination of living times, must have its unique advantage – price. The lifting speed of manual stacker is 1.6 meters, which requires about 100 feet, that is to say, the hydraulic pressure can rise about 1.5cm at a time. According to the calculation of hydraulic pressure at a time of 1.5 seconds, the speed is 1cm/s, lifting 1 meter takes 100 seconds. On the other hand, the lifting speed of the electric stacker is 10cm/s, which is 10 seconds if it increases by 1 meter. This is a test run on an empty train.
If the load operation, manual stacker needs more manpower hydraulic energy, the speed will be slower! But the speed of the electric stacker is still the same. You can see the difference in productivity just by looking at this rise and fall. Manual stacker is manual operation, so there is not much limit on the duration of work, the big limit is the problem of manpower. If it’s one person operating a stacker. Loading a load of goods on average to hydraulic 100 times, if it is 30 times then it is 3000 times, this workload is very large; And it takes a lot of effort to push and move.
Therefore, the use of manual stacker is not suitable for the use of large workload; At the same time, it is not suitable for high strength requirements, such as many need to rush loading and unloading places. The working efficiency of electric stacker is more than 5 times that of manual stacker, and the operation is easy, and the operator has little labor intensity. Electric forklift is driven by electricity. Compared with other forklifts, it has the advantages of no pollution, simple operation, energy saving and environmental protection, and more efficient. With the development of economy and everyone’s requirements for environmental protection.
Electric forklift has developed rapidly and its market sales have risen gradually. Now we are in the textile industry, food, tobacco and other industries. Electric forklift has basically replaced other forklifts. Balanced heavy liquefied petroleum gas forklift, referred to as LPG forklift, through the switch can use gasoline and liquefied gas switch, the big advantage is good exhaust emissions, carbon monoxide emissions significantly less than gasoline engine, suitable for high environmental requirements of indoor operations.
Generally using diesel, gasoline, liquefied petroleum gas or natural gas engines as the power, the high truck load capacity of 1.2 ~ 8.0 tons, the width of the operation channel is generally 3.5 ~ 5.0 meters, considering the exhaust emissions and noise problems, usually used in outdoor, workshop or other places without special requirements on exhaust emissions and noise. Due to the convenience of refueling, continuous operation can be achieved for a long time, and it is capable of working in harsh conditions (such as rainy weather). Diesel engine as the power, carrying capacity of 3.0 ~ 6.0 tons. In the case of no turning, it has the ability to take goods directly from the side fork, so it is mainly used to take long goods, such as wooden bars, steel bars and so on.
Post time: Mar-25-2022