Moving truck is a kind of light and small handling equipment, mainly used in the need for horizontal handling and crowded places. It has two fork legs that can be inserted directly into the bottom of the tray. Manual hydraulic pallet truck can be used to carry loading pallets or pallets of fruit and vegetable goods. Manual pallet truck is mainly composed of handle, tiller, hydraulic take-off and landing system, fork, bearing roller and other main parts. According to the type, it can be divided into standard type, fast lifting type, low lowering type, galvanized/stainless steel type, straight barrel type, heavy electronic scale, 5T heavy load type; The carrying capacity is 1.0T-5T, and the working channel width is generally 2.3~2.8 tons.
It can shorten the operation time of loading, unloading, handling and stacking, accelerate the turnover of vehicles and vessels, improve the safety degree of operation and realize civilized loading and unloading. Compared with large loading and unloading machinery, forklift operation has the advantages of low cost and less investment. Reduce cargo damage and improve operation safety. Forklift truck can be used for handling and loading operations in any place, and the wharf is no exception. The wharf front of forklift system adopts quayside container loading and unloading bridge to undertake loading and unloading operations of ships. The horizontal transportation between the wharf front and the yard as well as the stacking and loading and unloading of containers in the yard are undertaken by forklifts.
Filling oil should be strictly filtered, and filling oil to the tank should pass the specified oil filter. The oil filter should be checked and cleaned frequently. If it is damaged, it should be replaced in time. The brand of new oil to the tank should be the same as that of the old oil. When different grades of hydraulic oil need to be filled, the old oil should be completely discharged and cleaned before the new oil can be filled. The hydraulic oil with different grades should not be mixed. In recent years, factories, universities and scientific research departments have done a lot of useful work in developing the cause of forklift trucks.
In particular, the Lifting and transportation Machinery Research Institute of the First Machinery Department has done a lot of work on the organization planning, coordination and balance, product design and scientific research of the forklift industry, and has received good results. China has its own forklift series. The use of pallets in static state can be basically divided into pad use, stacking and shelf use, its bearing requirements increase in turn. The bearing capacity of pallet is embodied in three aspects: static load, dynamic load and shelf load. The bearing index of the same pallet decreases in these three aspects. According to the structure of the tray itself, it can be divided into single-sided or double-sided use, two-way fork or four-way fork.
For non-manual hydraulic haulers (electric, oil, gas, etc.), all trays are suitable. Want to maintain the cleanness of truck engine, also want to pay attention to the use environment, use a lot of truck in the warehouse and workshop, tend to have some pieces of debris such as wooden pallets, the production of waste and debris, etc., these sundry if around casters, will have a far-reaching influence on work efficiency, so must regularly check, remove debris around in a timely manner. Plastic pallets can be used instead of wood pallets if necessary.
Post time: Mar-11-2022