Formal professional manufacturers to help you select the applicable electric stacker, but customers in the first choice to lift car, you must also know some key points of choose and buy, can clear and factory technical personnel requirements, stacker size is not important, it is important to load, height, channel width and the size of the pallet size, etc., these data will influence choice stacker. Here are 5 questions that beginners should know:
1. Maximum load
The maximum load of goods determines the choice of the tonnage of the stacker. If the maximum load is 1 ton, the model of 1 ton should be selected. Even if the maximum load is less than 1 ton in most cases, it should also be selected according to the maximum load.
Height of 2.
You think it’s easy to choose the right height stacker? NONONO, the height here refers to the stack height door frame closing height and lifting height. The environment to consider the height of the stacker should be your operating environment, such as the height of the stacker in and out of the elevator and the safety door; The maximum lifting height of the cargo fork is considered according to the loading condition of your cargo. The lifting height range of ordinary stacker is 2-4m, and if it exceeds this height, it can choose forward forklift, and the maximum lifting height can reach 12m.
3. Pallet type
If the single-sided tray is used, the outrigger type stacker can be selected. The outrigger type stacker has outrigger in front, which can play the role of supporting balance. The characteristics of the outrigger type stacker are short and light, and the price is of course low, but it only applies to the single-sided tray, the double-sided tray can not be used, and the outrigger can not enter.
Customers using double-sided trays need to choose a stacker without front legs, fork hanging, the vehicle by the back seat of the body added weight block pressure down to balance support. The characteristics of this counterweight stacker are that it can be used for double-sided trays and some occasions where outrigger type cannot be used, but the weight of the counterweight stacker is very large, the length of the body is also large, and the price is more expensive than outrigger type.
Customer if can’t meet your homework counterweight type stacker channel, lift the bottom of the front legs do wide, generally within 550/680 mm wide, wide leg can do 1200/1500 mm, will be handling the tray (within the tray length less than wide, will be limited to them), the advantages of moderate price, can solve double tray or some special requirements of the goods.
4. Aisle width
How much is the maximum load, how wide is the aisle width of the shelf, and then to determine what kind of stacking car to use. Two choices, as customers goods size is relatively small, can be non-standard custom station type of stacker, a side handle to change the steering wheel, the side fork take goods, the price is relatively higher normal stacker, another option is to choose three to piling car, this stacking owners channel width 3.6 m, deputy channels in 1.6 m, 1 * 1.2 m tray, The lowest shelf height is 160~200mm, but the price is high, not uphill.
5. Relationship between load and lifting height
When the lifting height of the stackers is less than 3.3m, the maximum load capacity of the stackers is the rated load capacity. Overloading is strictly prohibited. When the lifting height of the truck is more than 3.3m, the load capacity of the truck is less than the rated load capacity.
Post time: May-29-2022