Many advantages of electric forklift in addition to the characteristics of low noise, no exhaust gas emissions, in fact, the use and maintenance cost of electric forklift compared to internal combustion forklift to have a great advantage. Due to its simple operation and flexible control, the operating intensity of the electric forklift operator is much lighter than that of the internal combustion forklift. Its electric steering system, acceleration control system, hydraulic control system and braking system are controlled by electrical signals, which greatly reduces the labor intensity of the operator. This will greatly help to improve the efficiency and accuracy of their work.
Electric forklifts are very popular in the market now. Compared with traditional diesel forklifts, electric forklifts have low maintenance cost, long service life, energy saving and environmental protection. But in daily use, the forklift battery is the need to maintain, so electric forklift for battery and what maintenance methods? Lower than the rated liquid level in daily use, will shorten the service life of the battery, and the electrolyte is too major lead to battery heat damage, therefore, must often pay attention to whether the electrolyte is enough. Terminals, wires, and covers: Check the joints of battery terminals and wires for corrosion caused by oxidation, and check whether the covers are deformed or heated. Battery surface dirty will cause leakage, should make the battery surface clean and dry at any time.
Add distilled water according to the specified liquid level, do not add too much distilled water in order to prolong the water interval, adding too much water will overflow electrolyte leakage. The battery will generate gas during charging. Keep the charging place well-ventilated and without open fire. Oxygen and acid gas generated during charging will affect the surrounding area. Unplug the charging plug during the charging process will produce electric arc, after the charging off, unplug the plug. After charging, a lot of hydrogen is retained around the battery, and no open fire is allowed. The cover plate of the battery should be opened for charging. Maintenance of terminal posts, wires and covers: only by professional technicians designated by the manufacturer. If it is not too dirty, you can wipe it with a damp cloth. If it is very dirty, it is necessary to remove the battery from the car, clean it with water and dry it naturally.
After returning to the warehouse, clean the outer body of the electric forklift truck, check the tire pressure, and eliminate the faults found in the work. Check the tightness of the tensioning bolts of fork frame and lifting chain. If the inspection found insufficient lubrication of the lifting chain, timely lubrication and adjustment of the lifting chain. Electric forklift batteries should be charged in time after use. It is forbidden to overdischarge, overcharge, high current charge, and discharge when insufficient charge, because it will lead to increased resistance, damage of positive and negative plates, decrease of forklift battery capacity, and it is difficult to use seriously. Lubricate and adjust the electric forklift chain.
The time required for maintenance, because the maintenance interval cycle of electric forklift is much longer than that of internal combustion forklift, and the time required for each maintenance is much less than that of internal combustion forklift, which greatly saves the labor cost required for maintenance. In fact, more substantial is that the downtime of forklift is greatly shortened. It is difficult to calculate the economic benefits brought by the improved working efficiency of forklifts
Post time: Dec-30-2021