1. Check before use:
Before use, carefully check whether the hydraulic pipeline of the vehicle is leaking oil, and whether the supporting wheels can work normally. It is forbidden to use the vehicle with faults. Open the electric door lock and check the multimeter on the instrument table to see whether the battery is powered on. If a light on the left end indicates that the battery is powered off. Check whether the vehicle lifting, descending and other actions are normal.
2. handling:
Open the electric door lock, pull the car near the load stack, press the down button, adjust the height and insert the car into the chassis of the goods as slowly as possible, press the up button to 200-300mm above the ground, pull the car to move to the shelf to be stacked, press the up button to raise the shelf to the appropriate height and then slowly move the goods to the accurate position of the shelf, Press the drop button to place the goods carefully on the shelf and remove them from the vehicle.
3.pick up goods:
Open the electric door lock, pull the vehicle near to the shelves, press the up button to shelves position, insert the pallet fork slow goods chassis, press the up button up the goods from the shelves 100 mm in height, slow-moving vehicles will be removed from the shelves of goods, press down the button to the 200-300 – mm height from the ground, move the vehicle pull from shelves to need to pile up the goods, Carefully lower the load and remove the vehicle.
4. Maintenance: keep the surface of the car clean, and carry out mechanical, hydraulic and electrical maintenance once a month.
5. charging:
In order to ensure the service life of the battery, the battery in use should be fully charged. When charging, pay attention to the positive and negative poles of the power supply should not be reversed. Use a special charger. The general charging time is 15 hours.
Post time: Jan-16-2022